diff --git a/README.md b/README.md
index 8bc190d..96ba2f1 100644
--- a/README.md
+++ b/README.md
@@ -60,7 +60,7 @@ It is also heavily advisable that you log into your device using SSH, so you sho
 1. Uncompress Image and flash onto SD card – you might need "7zip", "balenaEtcher" and/or other tools
 1. Check the SD card, open "dietpi.txt" and change some options (full documentation [here](https://dietpi.com/docs/usage/#options-within-the-file)):
    - For WiFi, use `AUTO_SETUP_NET_WIFI_ENABLED=1` and `AUTO_SETUP_NET_WIFI_COUNTRY_CODE=DE`, and also check "dietpi-wifi.txt"
-   - System options, e.g. `AUTO_SETUP_AUTOMATED=1`, `AUTO_SETUP_NET_HOSTNAME=ovdashboard`, `AUTO_SETUP_GLOBAL_PASSWORD=dietpi`, `AUTO_SETUP_LOCALE=de_DE.UTF-8`, `AUTO_SETUP_KEYBOARD_LAYOUT=de`, `AUTO_SETUP_TIMEZONE=Europe/Berlin`, `CONFIG_SERIAL_CONSOLE_ENABLE=0`
+   - System options, e.g. `AUTO_SETUP_AUTOMATED=1`, `AUTO_SETUP_NET_HOSTNAME=OVDashboard`, `AUTO_SETUP_GLOBAL_PASSWORD=dietpi`, `AUTO_SETUP_LOCALE=de_DE.UTF-8`, `AUTO_SETUP_KEYBOARD_LAYOUT=de`, `AUTO_SETUP_TIMEZONE=Europe/Berlin`, `CONFIG_SERIAL_CONSOLE_ENABLE=0`
 1. Be sure to at least change the password (and remember it 🙂️), then put the SD card into your device and boot it. Let the first time setup finish, it will take a bit. It will let you know when it is done!
 1. Log into your device using SSH. By default, that's user name `root` and password `dietpi`
 
@@ -76,14 +76,20 @@ This can all be done after logging into your prepared device:
    1. `sh install.sh`
 - If you feel adventurous and do not want to review the script, just run `sh <( curl --proto '=https' --tlsv1.2 -sSf 'https://code.yavook.de/OEKZident.de/ovdashboard/raw/branch/master/install/install.sh' )`
 
+> There will be some prompts during installation.
+>
+> - DietPi might ask if you want to change your GPU split. Choose **Yes**.
+> - DietPi will ask if you want to configure autostart options. **Cancel** that, this choice does not matter as it is changed by the installer.
+> - The installer will ask for the connected display's resolution. The default values should be fine, you can likely just hit **Return** here.
+> - The installer will ask for "display languages". This determines internationalization on the kiosk (connected display). For German, enter `de-DE,de,en-US,en`.
+
 Afterwards, reboot your device (`reboot` in the terminal). Your OVDashboard should be working now.
 
 For a better understanding of your newly created OVDashboard, refer to the [about section](#about-the-default-ovdashboard-deployment).
 
 ## Updates, upgrades
 
-<!-- TODO -->
-`/opt/ovdashboard`
+<!-- TODO `/opt/ovdashboard` -->
 
 ## Configuration