Merge branch 'release/0.1.1'

README.md

@@ -2,22 +2,117 @@
 
 The simple tool for managing container servers
 
+
 ## Quick start
 
 - Learn to use `docker` with `docker-compose`
 - Install kiwi-config
-- Look at [the example instance](../example)
+- Look at [the example instance](./example)
 - Look at the output of `kiwi --help`
 - Start building your own instances
 
+
 ## Installation
 
+A convenience installer is available as [install.sh](./install.sh) in this directory.
+You can `curl | sh` it using the following one-liner.
+
 ```shell script
 curl --proto '=https' --tlsv1.2 -sSf 'https://raw.githubusercontent.com/ldericher/kiwi-config/master/install.sh' | sh
 ```
 
-That script checks for the basic dependencies of the `kiwi` command, then downloads the main script and installs it to a location of your choice. Please consider installing `kiwi` into a directory inside your $PATH.
+The installer downloads the `kiwi` launcher script and installs it to a location of your choice.
+Please consider installing into a directory inside your `$PATH`.
+Run in a root shell or use `sudo sh` instead for system-wide installation.
+
+You should now be able to run `kiwi init --show` and see the default configuration file.
+This downloads the latest version of the main kiwi-config executable and sets it up for you.
+
+
+### Adjusting environment for `kiwi`
+
+`kiwi-config` depends on Python 3.6 (or later), [pipenv](https://pipenv.pypa.io/), and 
+[less](http://www.greenwoodsoftware.com/less/) being in your `$PATH`.
+
+In some cases, notably when using a multi-version system such as 
+[CentOS SCL](https://wiki.centos.org/AdditionalResources/Repositories/SCL), not all of these are in your `$PATH` 
+at login time.
+
+In those cases, you can simply create a `.kiwienv` file in your home directory.
+It will be sourced every time you use the `kiwi` command.
+For the aforementioned case where you installed `centos-release-scl` and `rh-python36`, your `~/.kiwienv` should 
+contain:
+
+```shell script
+#!/bin/sh
+
+. /opt/rh/rh-python36/enable
+```
+
 
 ## Get started
 
-TODO  
+### Create a kiwi-config instance
+
+Any directory is implicitly a valid `kiwi-config` instance using the default configuration.
+To prevent surprises however, you should run `kiwi init` in an empty directory and follow its directions before 
+actually using `kiwi` more.
+
+
+### Concept
+
+A `kiwi-config` instance is a directory containing a bunch of static configuration files.
+"Static" there as in "those don't change during normal service operation".
+These files  could be anything from actual `.conf` files to entire html-web-roots.
+
+Non-static, but persistent files are to be kept in a "service data directory", by default `/var/kiwi`.
+In your `docker-compose.yml` files, you can refer to that directory as **${TARGETROOT}**.
+
+Start the current directory as a `kiwi-config` instance using `kiwi up`, or stop it using `kiwi down`.
+This also creates kiwi's internal hub network, which you can use as **kiwi_hub** in your `docker-compose.yml` files.
+
+
+### Projects
+
+A `kiwi-config` instance usually contains several projects.
+A project is a collection of dependent or at least logically connected services, described by a `docker-compose.yml`.
+A well-known example would be webserver + php + database.
+
+To create a project, use the `kiwi new <project-name>` command.
+By default, this creates a new disabled project.
+Before enabling or starting, consider editing the new project's `docker-compose.yml` file to your liking.
+Finally, enable it with `kiwi enable <project-name>`.
+You can also create, enable or (analogously) disable multiple projects in a single command.
+
+Each project will have its own place in the service data directory, which you can refer to as **${TARGETDIR}**.
+
+Finally, start a project using `kiwi up <project-name>`.
+
+
+### Advanced kiwi-config
+
+`kiwi-config` extends the logical bounds of `docker-compose` to handling multiple projects.
+
+
+#### The `kiwi_hub`
+
+With kiwi-config, you get the internal kiwi_hub network for free.
+It allows for network communication between services in different projects.
+Be aware, services only connected to the kiwi_hub can't use a port mapping!
+In most cases, you will want to use this:
+
+```yaml
+networks:
+  - default
+  - kiwi_hub
+``` 
+
+
+#### The `CONFDIR`
+
+Sometimes, it's convenient to re-use configuration files across projects.
+For this use case, create a directory named `conf` in a project.
+Those will all be combined into a directory available as **${CONFDIR}** in your `docker-compose.yml` files.
+
+#### For everything else, look at `kiwi --help` 
+#### Happy admin-ing!

example/kiwi.yml

@@ -2,7 +2,7 @@
 # kiwi-config instance configuration #
 ######################################
 
-version: '0.1.0'
+version: '0.1.1'
 
 runtime:
   storage: /tmp/kiwi

install.sh

@@ -4,55 +4,39 @@
 # CONSTANTS #
 #############
 
-# dependencies to run kiwi-config
+# default installation directory
-KIWI_DEPS="bash python3 pipenv less"
-# default install directory
 INSTALL_DIR_DEFAULT="/usr/local/bin"
 
-##########
-# CHECKS #
-##########
 
-printf "checking dependencies ... "
+############
+# CLI ARGS #
+############
 
-for dep in ${KIWI_DEPS}; do
+# installation directory
-  printf "%s, " "${dep}"
+install_dir="${1}"
+# adjust default if given
+INSTALL_DIR_DEFAULT="${1:-${INSTALL_DIR_DEFAULT}}"
 
-  if ! command -v "${dep}" >/dev/null 2>/dev/null; then
-    echo
-    echo "Dependency '${dep}' not found, please install!" >/dev/stderr
-    exit 1
-  fi
-done
-
-echo "OK"
 
 ########
 # MAIN #
 ########
 
 # prompt for installation directory
-valid="no"
+while [ ! -d "${install_dir}" ]; do
-
-while [ "${valid}" = "no" ]; do
   printf "Select installation directory [Default: '%s']: " "${INSTALL_DIR_DEFAULT}"
-  read install_dir </dev/tty || install_dir="${INSTALL_DIR_DEFAULT}"
+  read -r install_dir </dev/tty || install_dir="${INSTALL_DIR_DEFAULT}"
   install_dir="${install_dir:-${INSTALL_DIR_DEFAULT}}"
 
-  # check
+  # check if given dir exists
-  if [ -d "${install_dir}" ]; then
+  if [ ! -d "${install_dir}" ]; then
-    valid="yes"
-
-  else
     printf "Install directory doesn't exist. Try creating? [Y|n] "
-    read yesno </dev/tty || yesno="yes"
+    read -r yesno </dev/tty || yesno="yes"
-    if [ ! "${yesno}" = "N" ] || [ ! "${yesno}" = "n" ]; then
+    yesno=$(printf '%.1s' "${yesno}")
 
-      # check creation failure
+    if [ ! "${yesno}" = "N" ] && [ ! "${yesno}" = "n" ]; then
-      if mkdir -p "${install_dir}"; then
+      # fail this script if we can't create the install dir
-        valid="yes"
+      if ! mkdir -p "${install_dir}"; then
-
-      else
         echo "Invalid install directory." >/dev/stderr
         exit 1
       fi
@@ -60,6 +44,11 @@ while [ "${valid}" = "no" ]; do
   fi
 done
 
+if [ ! -d "${install_dir}" ]; then
+  echo "wtf?"
+  exit 1
+fi
+
 # start actual installation
 printf "Installing into '%s' ... " "${install_dir}"
 

kiwi

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/sh
 
 #############
 # CONSTANTS #
@@ -10,7 +10,7 @@ KIWI_CONF_NAME="kiwi.yml"
 KIWI_VERSION_TAG="etc/version_tag"
 
 # dependencies to run kiwi-config
-KIWI_DEPS=(docker docker-compose)
+KIWI_DEPS="python3 pipenv less docker docker-compose"
 # base install dir
 KIWI_BASEDIR="${HOME}/.local/lib/kiwi-config"
 # per-user env setup script
@@ -21,28 +21,30 @@ KIWI_REPO="https://github.com/ldericher/kiwi-config"
 # use latest version by default
 KIWI_VERSION="master"
 
+
 ###################
 # DYNAMIC STRINGS #
 ###################
 
 # directory of correct installation
-function kiwi_installdir() {
+kiwi_installdir() {
   echo "${KIWI_BASEDIR}/${KIWI_VERSION}"
 }
 
 # src directory in installed version
-function kiwi_root() {
+kiwi_root() {
   echo "$(kiwi_installdir)/src"
 }
 
 # main script in installed version
-function kiwi_executable() {
+kiwi_executable() {
   echo "$(kiwi_root)/kiwi-config.py"
 }
 
 # cache current work directory
 WORKDIR="$(pwd)"
 
+
 ##################
 # PER-USER SETUP #
 ##################
@@ -50,20 +52,22 @@ WORKDIR="$(pwd)"
 # add in environment setup
 if [ -f "${KIWI_ENVFILE}" ]; then
   # shellcheck source=$HOME/.kiwienv
-  source "${KIWI_ENVFILE}"
+  . "${KIWI_ENVFILE}"
 fi
 
+
 ##########
 # CHECKS #
 ##########
 
-for dep in "${KIWI_DEPS[@]}"; do
+for dep in ${KIWI_DEPS}; do
-  if ! command -v "${dep}" &>/dev/null; then
+  if ! command -v "${dep}" >/dev/null 2>/dev/null; then
     echo "Dependency '${dep}' not found, please install!" >/dev/stderr
     exit 1
   fi
 done
 
+
 ########
 # MAIN #
 ########
@@ -77,7 +81,7 @@ fi
 
 # install if kiwi-config not found
 if [ ! -x "$(kiwi_executable)" ]; then
-  echo -n "Installing kiwi-config v${KIWI_VERSION} into ${KIWI_BASEDIR} ... "
+  printf "Installing kiwi-config v%s into %s ... " "${KIWI_VERSION}" "${KIWI_BASEDIR}"
 
   # switch to temp dir
   tmpdir=$(mktemp -d)
@@ -92,7 +96,7 @@ if [ ! -x "$(kiwi_executable)" ]; then
 
   if [ -x "$(kiwi_executable)" ]; then
     # after version update: no need to install
-    echo "kiwi-config v${KIWI_VERSION} found!"
+    echo "v${KIWI_VERSION} already installed!"
 
   else
     # install archive
@@ -106,15 +110,6 @@ if [ ! -x "$(kiwi_executable)" ]; then
   rm -rf "${tmpdir}"
 fi
 
-# check virtualenv
-cd "$(kiwi_installdir)" || :
-if ! pipenv --venv &>/dev/null; then
-  # install virtualenv
-  echo -n "Preparing virtualenv ... "
-  pipenv sync &>/dev/null
-  echo "OK"
-fi
-
 # go back to the original work directory
 cd "${WORKDIR}" || :
 
@@ -123,10 +118,19 @@ KIWI_ROOT="$(kiwi_root)"
 PIPENV_VERBOSITY=-1
 PIPENV_PIPFILE="$(kiwi_installdir)/Pipfile"
 
-export KIWI_ROOT
 export KIWI_CONF_NAME
+export KIWI_ROOT
 export PIPENV_VERBOSITY
 export PIPENV_PIPFILE
 
+# check virtualenv
+cd "$(kiwi_installdir)" || :
+if ! pipenv --venv >/dev/null 2>/dev/null; then
+  # install virtualenv
+  printf "Preparing virtualenv ... "
+  pipenv sync >/dev/null 2>/dev/null
+  echo "OK"
+fi
+
 # run main script
 exec pipenv run "$(kiwi_executable)" "${@}"

src/etc/command_help.txt

@@ -2,12 +2,11 @@ Commands for Operation:
   up          Bring up the whole instance, a project or service(s) inside a project
   down        Bring down the whole instance, a project or service(s) inside a project
   update      Update the whole instance, a project or service(s) inside a project
-  clean       Cleanly sync all configs to target folder, then relaunch affected projects
+  restart     Restart the whole instance, a project or service(s) inside a project
-  purge       Remove all running docker artifacts of this instance
 
 Commands for Instance Management:
-  config      Create or configure kiwi-config instance
+  init        Initialize or reconfigure kiwi-config instance
-  inspect     Inspect projects in this instance, services inside a project or service(s) inside a project
+  show        Show projects in this instance, services inside a project or service(s) inside a project
   cmd         Run raw docker-compose command in a project
 
 Commands for Project and Service Management:

src/etc/kiwi_help.txt

@@ -1,4 +1,4 @@
-kiwi-config is the tool for container server management.
+kiwi-config is the simple tool for managing container servers.
 
 Features:
   - Group services into projects using their own docker-compose.yml

src/etc/version_tag

@@ -1 +1 @@
-0.1.0
+0.1.1

src/kiwi/misc.py

@@ -21,7 +21,7 @@ def are_you_sure(prompt, default="no"):
         suffix = "[yes|NO]"
 
     answer = input(
-        f"{_surround('MUST HAVE CAREFULING IN PROGRESS', '!')}\n"
+        f"{_surround('MUST HAVE CAREFULING IN PROCESS', '!')}\n"
         f"\n"
         f"{_emphasize(prompt)}\n"
         f"\n"

src/kiwi/project.py

@@ -84,6 +84,7 @@ class Project:
         kwargs['env'].update({
             'COMPOSE_PROJECT_NAME': self.get_name(),
             'KIWI_HUB_NAME': config['network:name'],
+            'TARGETROOT': config['runtime:storage'],
             'CONFDIR': os.path.join(config['runtime:storage'], CONF_DIRECTORY_NAME),
             'TARGETDIR': self.target_dir_name()
         })

src/kiwi/subcommands/__init__.py

@@ -1,42 +1,39 @@
 # local
-from ._hidden import ConfCopyCommand, ConfPurgeCommand, NetUpCommand
+from ._hidden import ConfCopyCommand, NetUpCommand
 
 from .build import BuildCommand
-from .clean import CleanCommand
 from .cmd import CmdCommand
-from .config import ConfigCommand
 from .disable import DisableCommand
 from .down import DownCommand
 from .enable import EnableCommand
-from .inspect import InspectCommand
+from .init import InitCommand
 from .logs import LogsCommand
 from .new import NewCommand
 from .pull import PullCommand
-from .purge import PurgeCommand
 from .push import PushCommand
+from .restart import RestartCommand
 from .shell import ShellCommand
+from .show import ShowCommand
 from .up import UpCommand
 from .update import UpdateCommand
 
 __all__ = [
     'ConfCopyCommand',
-    'ConfPurgeCommand',
     'NetUpCommand',
 
     'BuildCommand',
-    'CleanCommand',
     'CmdCommand',
-    'ConfigCommand',
     'DisableCommand',
     'DownCommand',
     'EnableCommand',
-    'InspectCommand',
+    'InitCommand',
     'LogsCommand',
     'NewCommand',
     'PullCommand',
-    'PurgeCommand',
     'PushCommand',
+    'RestartCommand',
     'ShellCommand',
+    'ShowCommand',
     'UpCommand',
     'UpdateCommand',
 ]

src/kiwi/subcommands/_hidden.py

@@ -25,6 +25,7 @@ class ConfCopyCommand(SubCommand):
         conf_dirs = [
             project.conf_dir_name()
             for project in Projects.from_dir().filter_enabled()
+            if project.has_configs()
         ]
 
         if conf_dirs:
@@ -33,33 +34,12 @@ class ConfCopyCommand(SubCommand):
             logging.info(f"Sync directories: {conf_dirs}")
 
             Rootkit('rsync').run([
-                'rsync', '-r', *prefix_path_mnt(conf_dirs)
+                'rsync', '-rpt', '--delete', *prefix_path_mnt(conf_dirs)
             ], stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
 
         return True
 
 
-class ConfPurgeCommand(SubCommand):
-    """kiwi conf-purge"""
-
-    def __init__(self):
-        super().__init__(
-            'conf-purge',
-            action="Removing all configs for", add_parser=False,
-            description="Remove all config files in target directory"
-        )
-
-    def _run_instance(self, runner, args):
-        conf_target = f"{LoadedConfig.get()['runtime:storage']}/{CONF_DIRECTORY_NAME}"
-        logging.info(f"Purging directories: {conf_target}")
-
-        Rootkit().run([
-            'rm', '-rf', prefix_path_mnt(conf_target)
-        ], stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
-
-        return True
-
-
 def _find_net(net_name):
     ps = Executable('docker').run([
         'network', 'ls', '--filter', f"name={net_name}", '--format', '{{.Name}}'

src/kiwi/subcommands/clean.py

@@ -1,37 +0,0 @@
-from ..projects import Projects
-from ..subcommand import SubCommand
-
-
-class CleanCommand(SubCommand):
-    """kiwi clean"""
-
-    def __init__(self):
-        super().__init__(
-            'clean',
-            action="Cleaning all configs for",
-            description="Cleanly sync all configs to target folder, then relaunch affected projects"
-        )
-
-    def _run_instance(self, runner, args):
-        result = True
-
-        affected_projects = [
-            project.get_name()
-            for project in Projects.from_dir()
-            if project.has_configs()
-        ]
-
-        for project_name in affected_projects:
-            args.projects = project_name
-            result &= runner.run('down')
-
-        # cleanly sync configs
-        result &= runner.run('conf-purge')
-        result &= runner.run('conf-copy')
-
-        # bring projects back up
-        for project_name in affected_projects:
-            args.projects = project_name
-            result &= runner.run('up')
-
-        return result

src/kiwi/subcommands/down.py

@@ -1,5 +1,12 @@
+# system
+import logging
+import subprocess
+
 # local
+from ._hidden import _find_net
 from ..subcommand import ServiceCommand
+from ..config import LoadedConfig
+from ..executable import Executable
 from ..misc import are_you_sure
 
 
@@ -14,13 +21,27 @@ class DownCommand(ServiceCommand):
         )
 
     def _run_instance(self, runner, args):
+        net_name = LoadedConfig.get()['network:name']
+
         if are_you_sure([
             "This will bring down the entire instance.",
             "",
             "This may not be what you intended, because:",
             " - Bringing down the instance stops ALL services in here",
         ]):
-            return super()._run_instance(runner, args)
+            if super()._run_instance(runner, args):
+                # remove the hub network afterwards
+                if _find_net(net_name):
+                    Executable('docker').run([
+                        'network', 'rm', net_name
+                    ], check=True, stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
+
+                    logging.info(f"Network '{net_name}' removed")
+
+                else:
+                    logging.info(f"Network '{net_name}' does not exist")
+
+                return True
 
         return False
 

src/kiwi/subcommands/init.py

@@ -8,14 +8,14 @@ from ..subcommand import SubCommand
 from ..config import DefaultConfig, LoadedConfig
 
 
-class ConfigCommand(SubCommand):
+class InitCommand(SubCommand):
-    """kiwi config"""
+    """kiwi init"""
 
     def __init__(self):
         super().__init__(
-            'config',
+            'init',
-            action=f"Configuring '{KIWI_CONF_NAME}' in",
+            action=f"Initializing '{KIWI_CONF_NAME}' in",
-            description="Create or configure kiwi-config instance"
+            description="Initialize or reconfigure kiwi-config instance"
         )
 
         # -f switch: Initialize with default config

src/kiwi/subcommands/restart.py

@@ -0,0 +1,26 @@
+# local
+from ..subcommand import ServiceCommand
+from ..misc import are_you_sure
+
+
+class RestartCommand(ServiceCommand):
+    """kiwi restart"""
+
+    def __init__(self):
+        super().__init__(
+            'restart', num_projects='?', num_services='*',
+            action="Restarting",
+            description="Restart the whole instance, a project or service(s) inside a project"
+        )
+
+    def _run_instance(self, runner, args):
+        if are_you_sure([
+            "This will restart the entire instance."
+        ]):
+            return super()._run_instance(runner, args)
+
+        return False
+
+    def _run_services(self, runner, args, project, services):
+        project.compose_run(['restart', *services])
+        return True

src/kiwi/subcommands/show.py

@@ -24,14 +24,14 @@ def _print_list(strings):
         _print_list(list(strings))
 
 
-class InspectCommand(ServiceCommand):
+class ShowCommand(ServiceCommand):
-    """kiwi inspect"""
+    """kiwi show"""
 
     def __init__(self):
         super().__init__(
-            'inspect', num_projects='?', num_services='*',
+            'show', num_projects='?', num_services='*',
-            action="Inspecting",
+            action="Showing",
-            description="Inspect projects in this instance, services inside a project or service(s) inside a project"
+            description="Show projects in this instance, services inside a project or service(s) inside a project"
         )
 
     def _run_instance(self, runner, args):